Haiyu-optical Duplex Fiber Patch Cord ST to SC Multi-mode OM5 Fiber
jumpers
OM5 fiber Jumpers Description:
OM5 fiber Jumpers was originally called broadband multimode fiber
jumper (WBMMF).
It is a new standard of fiber jumper defined by TIA and IEC. The
fiber diameter is 50 / 125μm.
Compared with OM3 and OM4 fiber jumper, OM5 Fiber jumpers can be
used for higher bandwidth applications.
The manufacturing process of optical fiber preforms for OM5 fiber
patch cables has been optimized so that it can support higher
bandwidths.
In terms of structure, it is no different from OM3 and OM4 fiber
jumpers, so it can be fully backward compatible with traditional
OM3 and OM4 multimode fiber jumpers.
In addition, in February 2017, TIA stipulated that the
identification color of OM5 fiber jumpers is aqua, and OM3 and OM4
fiber jumpers can still be used with OM5 fiber jumpers.
The only difference is that the color of the outer jacket needs to
be changed in order Easily identify the OM5 connection.
OM5 fiber is more scalable and flexible, and can support
higher-speed network transmission with a smaller number of
multimode fiber cores, but the cost and power consumption are much
lower than single-mode fiber. Therefore, it will be widely used in
the future 100G / 400G / 1T super-large data center.
OM5 fiber Jumpers Advantage:
1. Om5 fiber is at least as good as OM4 in supporting all
traditional applications, and it is fully compatible and
interoperable with OM3 and OM4 fiber.
2. Om5 is designed to support at least four low-cost wavelengths in
the range of 850-950 nm, so as to optimize the support for emerging
short wave division multiplexing (sdwm) applications, reduce the
number of parallel fibers by at least four times, use only two
fibers (instead of eight) to continuously transmit 40Gb / s and
100GB / s, reduce the number of fibers and achieve higher speed. In
the future, SWDM technology may also be used to achieve Ethernet
transmission speeds of 200, 400 and 800Gb / s in multimode fiber.
OM5 fiber Cable
OM5 Fiber Jumpers specification:
| Fiber Connector | ST UPC to SC UPC | Fiber Mode | OM5 50/125 |
| Fiber Type | Duplex | Fiber Jacket | 2.0mm/3.0mm, PVC/LSZH |
| Insertion Loss | ≤0.3dB | Return Loss | ≥35dB |
| Cladding Diameter | 125 ± 1 µm | Wavelength | 850/1300nm |
| Operating Temperature | -40~ 75°C | Jacket Color | Lime Green |
| Minimum Bend Radius | 10D | Compliants | RoHS, ISO9001 |
OM5 Fiber Jumpers features:
- Clear identification with polarity A and B.
- Particular housing design eliminates potential connector and cable
damage.
- Reduce cable pathway congestion.
- Simplifies cable management.
OM5 Fiber Jumpers Applications:
- Local Area Networks(LANs);
- Data Processing networks;
- Premise installations;
- Wide Area Networks(WANs).
